[. . . ] Before using the dishwasher, read the user instructions! ADG 352 Quick Reference Guide GB Program selector knob Mains On / Off Start button Switches “on” when the dishwasher is operating. Switches off at the end of the programme. Programme chart Programmes Loading instructions Detergent 2) A X X X Consumption 3) Litres 5. 0 13. 0 16. 0 16. 0 B X X kWh 0. 02 0. 70 1. 24 1. 65 Minutes 10 30 133 90 Pre-Rinse Quickwash Normal 1) Normal Intensive 1) 2) cold Crockery to be washed later. [. . . ] Crockery holders (B): Depending on the position, for example plates, cups and long-stemmed glasses. Revolving glass support (C): 2) Depending on the position, for example small or long-stemmed glasses. Place the cutlery basket (D) in the upper rack. Rack height adjustment (also when loaded): • Lower adjustment: pull out the two rack handles outwards (E) and lower the rack. • Upper adjustment: pull the two handles (E) upwards until the rack clicks into place (Factory setting). The rack must be level on both sides. Lower rack: Depending on the model with fixed or tilting plate holders (F). Half Load: Load the lower rack only. Greater washing power, particularly for plates and saucepans. Cutlery basket (G) or (H): Some models are provided with a grid (I) that can be fitted onto the cutlery basket to keep items separated. Sharp knives and forks that might cause injury must be placed in the cutlery basket with the handles positioned upwards. Only use dishwasher-proof crockery and dishes. Do not use the appliance for items not suitable for washing in a dishwasher, for example wooden items, aluminium, plastic utensils, tin, hand-decorated crockery (unglazed), silver cutlery. Spare parts which are sold separately: 1) Multi-purpose support (A) - N. WGH 1000 series. What to do if. . . If a fault occurs, before contacting our After-Sales Service, make the following checks to try and remedy the problem (* see also the corresponding chapter in the user instructions). Problem The appliance is not working Cause • No water supply. • • • • • • • Remedy • Starting the selected programme. Clean the water supply tap filter. The programme can be set to “0” to start. If crockery is not perfectly dry If crockery is not perfectly clean • Insufficient rinse aid. [. . . ] Before contacting our After-Sales Service, take note of the following: • The nature of the fault. • The service code (the number indicated on the adhesive rating plate) inside the door on the right-hand side. WH/IV/GB [. . . ]